APPLICATION AND MAINTENANCE

Dilute Traction Clean with warm water at the following dilutions depending on the degree and type of soil to be removed:
Light Duty Cleaning: 8 ounces Traction Clean per gallon of water (1:16).
Medium Duty Cleaning: 12 ounces Traction Clean per gallon of water (1:10).
Heavy Duty Cleaning: 16 ounces Traction Clean per gallon of water (1:8).
Traction Clean may be applied with either an autoscrubber or by damp mopping. The most positive coefficient of friction will be obtained by using this product in a routine maintenance and cleaning program designed to address the specific environmental conditions of the facility in which it is being used. In order to avoid re-depositing grease and protein soils when damp mopping, a two bucket system, in which one bucket contains the Traction Clean, and one bucket is used for soiled solution, should be used. Heavy deposits of protein soil, dirt, or grease may be addressed by applying Traction Clean at 16 ounces per gallon using a pressurized sprayer, watering can, or mop, scrubbing the area with a stiff bristled brush or buffing machine, removing the soiled solution with a wet vacuum or mop, and finishing the cleaning procedure by damp mopping. Allow the floor to dry, do not rinse.

CAUTION: Contains alkaline detergents. May cause irritation in undiluted concentrations. If ingested give vinegar, lemon or orange juice. Follow with olive oil. External contact, flood with water. In the event of eye contact, flush with plenty of clean water. Contact a physician immediately. Contains 2-Butoxyethanol CAS# 111-76-2, and 2-Amino Ethanol CAS# 141-43-5. Read MSDS thoroughly before using.

Perma Home Page                 Traction Clean - Anti Slip Floor Cleaner/Degreaser