APPLICATION & MAINTENANCE

STRIPPING: Dilute stripper 6 ounces per gallon, for heavy wax or finish build-up or 3 ounces per gallon for routine stripping with "warm" water. Apply stripper liberally to surface, but do not flood. Allow solution to stand on floor for five to ten minutes, then agitate with a buffing machine and black stripping pad. Remove emulsified finish and stripping solution with wet vacuum or mop, and thoroughly rinse the floor with clean water to remove any alkaline residue.

DEGREASING: Dilute stripper with "warm" water as necessary to emulsify grease or oily film. Remove solution with wet vacuum or mop, and rinse thoroughly with clean water.

SPECIFICATIONS
Active Ingredients Synthetic detergents,
and alkaline builders
pH 13-13.5
Free Ammonia 0.8%
Free Alkali &lt3%
Free Acid None
Phosphates None
Abrasives None
Color Purple
Odor Moderate
Solubility in Water 100%
Freeze/Thaw Stability 3 Cycles
Shelf Life 1 Year Minimum
Flash Point N/A
Weight Per Gallon 8.6 Lbs
Biodegradable Yes
Soil Suspension Very Good


SAFETY INFORMATION
Health 2
Flammability 0
Reactivity 0
Personal Protection B


CAUTION: Contains alkaline detergents which may cause irritation in undiluted concentrations. If ingested give vinegar, juice of lemon, grapefruit or orange freely. Follow with olive oil. In the event of skin contact, flood the affected area with water, rinse with vinegar, rinse with water again. For contact with eyes, rinse with clear water. Contact a physician. Contains 2-Butoxyethanol CAS #111-76-2, and Sodium Hydroxide CAS #1310-73-2. For detailed information consult MSDS sheet.

Perma Home Page                 Uncover Tile Stripper