APPLICATION & MAINTENANCE

Dilute 32 ounces of N.O.S.E. for routine stripping, 42 ounces for medium build-up, or 128 ounces for heavy build-up per gallon of “COLD” water. Apply stripping solution with a mop and let it stand for five minutes. Remove the dissolved finish and solution with a wet vacuum. Any residual dissolved floor finish not removed by vacuuming should be removed by light rinsing or damp mopping. Allow the floor to dry thoroughly before applying any of Perma's high quality finishes. N.O.S.E. is not recommended for use on Asphalt Tile or older Linoleum Tiles, as it may remove the dye, particularly from dark colored tiles.

SPECIFICATIONS
Active Ingredients Water miscible solvents,
amine complexes,
alcohol ethoxylates

pH 12-12.5
Free Ammonia None
Free Alkali 0.5%
Free Acid None
Phosphates None
Abrasives None
Color Light Yellow
Odor Moderate
Solubility in Water 100%
Freeze/Thaw Stability 3 Cycles
Shelf Life 1 Year Minimum
Flash Point Above 200 F.
Weight Per Gallon 8.8 Lbs
Biodegradable Yes
Soil Suspension Very Good


SAFETY INFORMATION
Health 2
Flammability 0
Reactivity 0
Personal Protection B


CAUTION: This product contains a strong alkaline ingredient. If ingested, give vinegar, juice of lemon, grapefruit, or orange freely . Do NOT induce vomiting. Get immediate medical attention. If contact with skin or eyes occurs, flush with large volumes of water. Get immediate medical attention. Contains 2-Amino Ethanol CAS #141-43-5. For detailed information, consult MSDS sheet.

Perma Home Page                 N.O.S.E. Tile Stripper